Rear Bumper - Pro ride
$359.99 CAD
:
Shipped : 1 to 5 days
Designed for both durability and practicality, this rear bumper for Polaris Pro-Ride is the perfect ally for deep snow riding enthusiasts. Its raised handle makes it easy to grip, even in demanding conditions, while showcasing a modern design and a durable powder-coat finish.
Its wide contact surface helps reinforce your snowmobile’s tunnel, increasing its resistance to stress.
Features:
-
Powder-coat finish resistant to impacts and corrosion
-
Raised handle for better accessibility in deep snow
-
Stainless steel hardware included
-
Optional tow hitch available (installed directly on the bumper if selected)
-
100% in-house manufacturing, ships within 5 days even if listed as “Out of Stock”
-
Actual product may vary slightly from photo
Important Notice:
Do not pull loads using the raised handle — only use the tow hitch for this application.
Combine strength, functionality, and style to make the most of your Polaris Pro-Ride snowmobile adventures.
Compatibilite
| Manufacturer | Model | Year | |
|---|---|---|---|
| Polaris | 600 RMK 144\" | 2016 | |
| Polaris | 600 RMK R 144\" | 2016 | |
| Polaris | 600 Switchback Assault 144\" | 2016 | |
| Polaris | 600 Switchback Assault R 144\" | 2016 | |
| Polaris | 800 Switchback Assault 144\" | 2016 | |
| Polaris | 800 Switchback Assault R 144\" | 2016 | |
| Polaris | 800 Switchback Assault TD 144\" | 2016 | |
| Polaris | 800 Switchback Assault Terrain Dominator R 144\" | 2016 |
| Manufacturer | Model | Year | |
|---|---|---|---|
| Polaris | 600 RMK 144\" | 2015 | |
| Polaris | 600 RMK R 144\" | 2015 | |
| Polaris | 600 Switchback Assault 144\" | 2015 | |
| Polaris | 600 Switchback Assault R 144\" | 2015 | |
| Polaris | 800 Switchback Assault 144\" | 2015 | |
| Polaris | 800 Switchback Assault R 144\" | 2015 |
| Manufacturer | Model | Year | |
|---|---|---|---|
| Polaris | 600 RMK L/C 144\" | 2014 | |
| Polaris | 600 RMK R L/C 144\" | 2014 | |
| Polaris | 600 Switchback Assault 144\" | 2014 | |
| Polaris | 600 Switchback Assault R 144\" | 2014 | |
| Polaris | 800 Switchback Assault 144\" | 2014 | |
| Polaris | 800 Switchback Assault LE 144\" | 2014 | |
| Polaris | 800 Switchback Assault LE R 144\" | 2014 | |
| Polaris | 800 Switchback Assault R 144\" | 2014 |
| Manufacturer | Model | Year | |
|---|---|---|---|
| Polaris | 600 RMK L/C 144\" | 2013 | |
| Polaris | 600 RMK R L/C 144\" | 2013 | |
| Polaris | 800 Switchback Assault 144\" | 2013 | |
| Polaris | 800 Switchback Assault 2.0 144\" | 2013 | |
| Polaris | 800 Switchback Assault 2.0 R 144\" | 2013 | |
| Polaris | 800 Switchback Assault R 144\" | 2013 |
| Manufacturer | Model | Year | |
|---|---|---|---|
| Polaris | 600 RMK L/C 144\" | 2012 | |
| Polaris | 600 RMK R L/C 144\" | 2012 | |
| Polaris | 800 Switchback Assault 144\" | 2012 | |
| Polaris | 800 Switchback Assault R 144\" | 2012 |
| Manufacturer | Model | Year | |
|---|---|---|---|
| Polaris | 800 Switchback Assault 144\" | 2011 | |
| Polaris | 800 Switchback Assault R 144\" | 2011 |
How to tell if your Polaris snowmobile is on a PRO-RIDE chassis
From 2011 to 2015, Polaris used the PRO-RIDE chassis on several snowmobile models. Known for its durability and stability, it defined an entire generation before the arrival of the AXYS chassis.
With platform changes over the years, it can be tricky to know for sure. Here’s how to identify yours.
✅ 1. Check the year and model
If your Polaris snowmobile is a 2011 to 2015 PRO-RMK, RMK, Indy, or Assault, it is on a PRO-RIDE chassis.
In 2015, Polaris introduced the AXYS chassis on a few specific models (such as certain Switchback versions), but the PRO-RMK, RMK, Indy, and Assault remained on the PRO-RIDE chassis that year.
✅ 2. Recognize the chassis design
The PRO-RIDE chassis can be identified by:
-
A more angular, less streamlined tunnel compared to the AXYS
-
A lower rear grab handle than newer generations
-
A seat design that is straighter and less tapered
✅ 3. Polaris models typically on the PRO-RIDE chassis
-
PRO-RMK and RMK (2011–2015)
-
Assault (2011–2015)
-
Indy (2013–2015)
-
Many utility models such as Voyageur or WideTrak (up to 2015)
❓ Still not sure?
Send us the following at info@itekindustries.ca:
-
Year, exact model, and track length
-
Or a photo of your snowmobile
Our team can quickly confirm if your sled is on the PRO-RIDE chassis or not.
PA02-PO-RM-12-144-RE / AT02-PO
8 other products in the same category:
$249.99 CAD
Note: Make the complete selection of options and then it will be possible to validate the compatibility of your snowmobile by looking in...
$219.99 CAD
Shipped : 1 to 3 days
Compatible with Itek Industries front bumper and the original one
Made of aluminum
Powdercoated
Offers protection over a large area
* Not...
$249.99 CAD
Made of aluminum
Powdercoated
Protective plate to prevent any debris from getting between the plastics of the snowmobile and the bumper...
$69.99 CAD
Sleigh hitch for Itek Industries rear bumper / Polaris Matryx.
Requires no drilling for installation
Black color
Made of steel...
$69.99 CAD
Shipped : 1 to 2 days
Black Powdercoat Sleigh Hitch for Itek Industries rear bumper for Polaris Pro-Ride, Polaris Axys, Ski-doo XM/XP, Ski-doo Gen4, Arctic Cat...
$359.99 CAD
Shipped : 1 to 5 days
Designed for both durability and practicality, this rear bumper for Polaris Axys is ideal for deep snow riders. Its raised handle...
$444.99 CAD
Specifically designed for Polaris Matryx snowmobiles, this rear bumper combines strength, functionality, and modern style. Its raised...
$219.99 CAD
Note: Make the complete selection of options and then it will be possible to validate the compatibility of your snowmobile by looking in...